Your Complete Workstation Starts Here

Since 1996

GOLD-SMITH & BANKING SAFES

Security Bookroom Door

low-risk security doors range

 

Features

+ Door - Overall thickness of 127mm for Class A Door and 110mm for Class B Door.

The protective layer consists of a steel door plate of 12mm for Class A Door and 9mm for Class B Door.

Both door and frame are electrically welded to produce a structure of consistent strength. A fire resistant panel is also fitted to the back of the door, contributing to better fire resisting properties.

 

+ Boltwork - secure with heavy cylindrical steel bolts on the front edge of the door and additional fixed back bolts at the back edge of the door. 5 bolts for Class A Door and 4 bolts for Class B Door.

All bolts are 32mm in diameter and are Nickel Plated to promote resistance against corrosion. All bolts engage behind solid rebates integrated into the door frame when locked.

 

+ Locking - Both doors are secured with a single 3-wheel Keyless Combination Lock and a 8-lever double bitted Key Lock as standard. Both Locks operated independently of each other.

 

+ Relocker - The Keyless Combination Lock for both doors are protected by a tempered glass relocker. The relocker will be activated when the lock is attacked. The relocker is designed to secured itself into a solid metal extrusion that forms part of the integrated boltwork system when triggered.

The relocker is in turn protected by Chubbsafes drill resistant plate.

 

+ Finish - The door comes stadard with a painted grey primer finish.

2 or 3 1/2" Strongroom Door

burglar resistant

 

Features

+ Door - Solid door slab with a protective thickness of 89mm (3.5") forms the basis of the door which has an overall thickness of 226mm. Filled with a specially formulated F80 barrier material reinforced with steel fibers provides resistant to high speed drilling, oxy-acetylene cuttings and jack attacks.

 

+ Boltwork - Secured by a 7 active front bolts, 2 active top bolts, 2 active bottom bolts and 7 passive back bolts. Each bolt has a diameter of 50mm.

 

+ Locking - Secured with a single 3-wheel Keyless Combination Lock capable of 1,000,000 change codes and a 8-lever double bitted Key Lock as standard. Both Lockes operated independently of each other.

 

+ Relocker - Glass Reclockers protect both the Keyless Combination Lock and Key Lock in the door. Any forced attempts to dislodge the locks would activate both relockers. This restricts the movement of the internal boltwork system. Relockers are further protected by Chubbsafes patented Torch and Drill Resistant (TDR) material.

 

+ Frame - The "wrapped around the wall" door frame is fabricated from steel sections, bent to form a single structure. Vestibule side frames at full height of the door are attached to the frame and grip the inside of the wall. This design provides stronger resistance against attacks to the door.

 

+ Emergency Ventilator - An emergency ventilator is integrated into the door frame to provide fresh air, allow two way conversation and to supply food or water to anyone trapped in the strongroom.

 

+ Lighting Control - A relay micro switch is fitted to the door to control the electric lighting in the room and to ensure that when the door is closed, all lighting within the room is switched off.

 

+ Alarm Micro Switch - A relay micro switch is fitted to the door for possible connection to the main intruder alarm system as an additional protection.

4 1/2" Vault Door

high-risk security

 

Features

+ Door - Solid door slab with a protective thickness of 114mm (4.5") forms the casis of the door, whch has an overall thickness of 251mm. Filled with a specially formulated F80 barrier material reinforced with steel fibers provides resistant to high speed drilling, oxy-acetylene cuttings and jack attacks.

 

+ Boltwork - Secured by 7 heavy cylindrical through bolts, 2 top bolts and 2 bottom bolts securing all 4 sides of the door. The horizontal through bolts extend throughout the full width of the door. Each bolt has a diameter of 38mm.

 

+ Locking - Secured with a single high security 4-wheel Keyless Combination Lock c/w blinder shield capable of 100,000,000 change codes and a 11-lever double bitted Key lock with detachable key bit as standard. Both locks operated independently of each other.

 

+ Relocker - Glass Relockers protect both the Keyless Combination Lock and Key Lock in the door. Any forced attempts to dislodge the locks would activate a total of 7 independent relockers. This restricts the movement of the internal boltwork system. Relockers are further protected by Chubbsafes patented Torch and Drill Resistant (TDR) material.

 

+ Frame - The "wrapped around the wall" door frame is abricated from steel sections, bent to form a single structure. Vestibule side frames at full height of the door are attached to the frame and grip the inside of the wall. This design provides stronger resistance against attacks to the door.

 

+ Emergency Ventilator - An emergency ventilator is integrated into the door frame to provide fresh air, allow two way conversation and to supply food or water to anyone trapped in the strongroom.

 

+ Lighting Control - A relay micro switch is fitted to the door to control the electric lighting in the room and to ensure that when the door is closed, all lighting within the room is switched off.

 

+ Alarm Micro Switch - A relay micro switch is fitted to the door for possible connection to the main intruder alarm system as an additional protection.

Safe Deposit Lockers

burglar protection

 

Chubbsafes Safe Deposit Lockers

- Safe Deposit Locker incorporates quality design and durability of the highest order. Two separate sets of locks of 10 levers each are used to operate the lockers with a unique key profile. With a vast range of variations, the possibility of 2 keys being identical is virtually impossible.

 

- Installed throughout the globe in many of the world's finest financial institutions. Trusted as a leader in Safe Deposit Lockers installation, Chubbsafes offer an unrivaled level of security while remaining committed to its core values of trust and security.

 

- No two Safe Deposit Locker installation are identical. Each installation is treated individually and is carefully planned to meet local requirements.

 

- When contacted at the initial planning stages, security installation problems peculiar to your needs are thoroughly studied and detailed plans may be submitted without obligation.

 

Dual Control Locking Mechanism

- Each locker is fitted with a dual control lock with 2 keyholes. One key is for the Renter and the other for the Custodian. This ensures that the Custodian and the Renter has to be present when any safe deposit locker is accessed.

 

- The Custodian;s key must be first inserted and turned before the Renter's key can be used. The locking bolt may then only be withdrawn to open the door to retrieve the inner container. The Custodian will then withdraw his key as the Renter's key is only required to relock the Safe Deposit Locker.

 

- The Renter Key cannot be withdrawn without locking the door. For increased security, the lock on each Safe Deposit Locker should be changed each time before a new user is assigned to the safe deposit locker.

 

- Electronic Locks can be fitted to replace the key locks as an option.